[Openmcl-devel] trunk

[Gary Byers]

Ahem. I broke SAVE-APPLICATION in the trunk a few days ago.
It should be fixed now.

On Wed, 27 May 2009, Chris Van Dusen wrote:

> Is this message from the command line or the IDE?
>
> I had this happen in the IDE a couple of days ago after checking out trunk, 
> but didn't run the command line to see if the issue was there, as well.
>
> What I did:
>
> check out trunk
> run ccl64 (it's in my $PATH)
> (ccl:rebuild-ccl :full t)
> (require "cocoa-application")
> (quit)
> start the IDE, and noted the older revision in the Welcome
> quit IDE
> run ccl64
> (require "cocoa-application")
> (quit)
> started the IDE, and saw that the revision had been updated
>
> At the time, I took it to be some user error in the first require, but it 
> sounds similar to your issue.
>
> hth,
> Chris.
>
> On May 27, 2009, at 5:28 AM, Joakim Sandgren wrote:
>
>> Hi Peter,
>> Thank you for advice!!
>> I tried this at once but I am still in the
>> Welcome to Clozure Common Lisp Version 1.3-dev-r11866M-trunk (DarwinX8632)!
>> 
>> but I think that I do have control over my directories and before I sent 
>> the mail I did a new /trunk directory. but no difference.
>> I also thewed away the preferences...
>> I rebooted,//
>> Hrm, I can't think of anything else to do...! 
>> argh
>> 
>> /Joakim
>> 
>> Le 27 mai 09 à 11:52, peter a écrit :
>> 
>>> Hi Joakim,
>>> I had this when I forgot to specify into what directory (cd) I wanted the 
>>> download to go. so I mistakenly created another new ccl directory inside 
>>> my mail ccl directory.  so that was updated, but my main directory was 
>>> not.
>>> Solution: svn co 
>>> <http://svn.clozure.com/publicsvn/openmcl/trunk/darwinx86/ccl>http://svn.clozure.com/publicsvn/openmcl/trunk/darwinx86/ccl 
>>> ~/yourccldir
>>> 
>>> Peter
>>> 
>>> At 10:22 AM +0200 09/05/27, Joakim Sandgren wrote:
>>>> Hi,
>>>> I have a strange error .
>>>> I cant update ccl.
>>>> In the terminal I put :
>>>> svn co 
>>>> <http://svn.clozure.com/publicsvn/openmcl/trunk/darwinx86/ccl>http://svn.clozure.com/publicsvn/openmcl/trunk/darwinx86/ccl
>>>> 
>>>> this works fine, and after downloading it says :
>>>> 
>>>> Checked out revision 12135.
>>>> 
>>>> 
>>>> then I launch the dx86cl unix file (the 64bits give the same result) and 
>>>> then in the terminal I have :
>>>> 
>>>> Welcome to Clozure Common Lisp Version 1.3-dev-r11866M-trunk 
>>>> (DarwinX8632)!  (!!)
>>>> 
>>>> and then I (rebuild-ccl :full t) i (quit)
>>>> then (require 'cocoa-application)
>>>> 
>>>> but i'm still stuck in the r11866-trunk!
>>>> 
>>>> How Come?
>>>> 
>>>> What am I missing again ?!
>>>> 
>>>> Sincerely
>>>> /Eagertoseeallthefixes
>>>> 
>>>> 
>>>> 
>>>> 
>>>> Joakim Sandgren
>>>> joakim sandgren musik
>>>> 42, rue de Maubeuge
>>>> 75009 Paris
>>>> France
>>>> +33 (0)1 45 26 43 90
>>>> <mailto:info at joakimsandgren.com>info at joakimsandgren.com
>>>> <http://www.joakimsandgren.com/>http://www.joakimsandgren.com
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Openmcl-devel mailing list
>>>> Openmcl-devel at clozure.com
>>>> http://clozure.com/mailman/listinfo/openmcl-devel
>>> 
>> 
>> 
>> 
>> 
>> Joakim Sandgren
>> joakim sandgren musik
>> 42, rue de Maubeuge
>> 75009 Paris
>> France
>> +33 (0)1 45 26 43 90
>> info at joakimsandgren.com
>> http://www.joakimsandgren.com
>> 
>> _______________________________________________
>> Openmcl-devel mailing list
>> Openmcl-devel at clozure.com
>> http://clozure.com/mailman/listinfo/openmcl-devel
>